zigbee2mqtt台電維修後啟動失敗（已解決）

barryboy5566

各位大神好，上禮拜六（9/16）下午小弟的住處台電在下午1點半及4點10分有兩次施工
因為我中午前就出門的關係，所以沒辦法在施工前先把總電源關閉
下午4點多回來後發現Aqara的6鍵無線開關無法使用，進到HA裡面發現z2m無法開啟

以下為z2m裡面日誌紀錄：

1. [17:31:33] INFO: Preparing to start...
   
2. [17:31:34] INFO: Socat not enabled
   
3. [17:31:34] INFO: Zigbee Herdsman debug logging enabled
   
4. [17:31:36] INFO: Starting Zigbee2MQTT...
   
5. Zigbee2MQTT:debug 2023-09-18 17:31:43: Loaded state from file /config/zigbee2mqtt/state.json
   
6. Zigbee2MQTT:info  2023-09-18 17:31:43: Logging to console and directory: '/config/zigbee2mqtt/log/2023-09-18.17-31-43' filename: log.txt
   
7. Zigbee2MQTT:debug 2023-09-18 17:31:43: Removing old log directory '/config/zigbee2mqtt/log/2023-09-18.17-26-28'
   
8. Zigbee2MQTT:info  2023-09-18 17:31:43: Starting Zigbee2MQTT version 1.33.0 (commit #unknown)
   
9. Zigbee2MQTT:info  2023-09-18 17:31:43: Starting zigbee-herdsman (0.18.5)
   
10. Zigbee2MQTT:debug 2023-09-18 17:31:43: Using zigbee-herdsman with settings: '{"adapter":{"concurrent":null,"delay":null,"disableLED":false},"backupPath":"/config/zigbee2mqtt/coordinator_backup.json","databaseBackupPath":"/config/zigbee2mqtt/database.db.backup","databasePath":"/config/zigbee2mqtt/database.db","network":{"channelList":[11],"extendedPanID":[221,221,221,221,221,221,221,221],"networkKey":"HIDDEN","panID":6754},"serialPort":{"path":"tcp://192.168.1.122:6638"}}'
    
11. 2023-09-18T09:31:44.203Z zigbee-herdsman:adapter Failed to validate path: 'Error: spawn udevadm ENOENT'
    
12. 2023-09-18T09:31:44.208Z zigbee-herdsman:controller:log Starting with options '{"network":{"networkKeyDistribute":false,"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13],"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11]},"serialPort":{"path":"tcp://192.168.1.122:6638"},"databasePath":"/config/zigbee2mqtt/database.db","databaseBackupPath":"/config/zigbee2mqtt/database.db.backup","backupPath":"/config/zigbee2mqtt/coordinator_backup.json","adapter":{"disableLED":false,"concurrent":null,"delay":null}}'
    
13. 2023-09-18T09:31:44.210Z zigbee-herdsman:adapter:zStack:znp:log Opening TCP socket with 192.168.1.122:6638
    
14. 2023-09-18T09:31:44.302Z zigbee-herdsman:adapter:zStack:znp:log Socket connected
    
15. 2023-09-18T09:31:44.304Z zigbee-herdsman:adapter:zStack:znp:log Socket ready
    
16. 2023-09-18T09:31:44.306Z zigbee-herdsman:adapter:zStack:znp:log Writing CC2530/CC2531 skip bootloader payload
    
17. 2023-09-18T09:31:44.306Z zigbee-herdsman:adapter:zStack:unpi:writer --> buffer [239]
    
18. 2023-09-18T09:31:45.313Z zigbee-herdsman:adapter:zStack:znp:log Skip bootloader for CC2652/CC1352
    
19. 2023-09-18T09:31:45.319Z zigbee-herdsman:adapter:zStack:znp:SREQ --> SYS - ping - {"capabilities":1}
    
20. 2023-09-18T09:31:45.323Z zigbee-herdsman:adapter:zStack:unpi:writer --> frame [254,0,33,1,32]
    
21. 2023-09-18T09:31:51.330Z zigbee-herdsman:adapter:zStack:znp:SREQ --> SYS - ping - {"capabilities":1}
    
22. 2023-09-18T09:31:51.333Z zigbee-herdsman:adapter:zStack:unpi:writer --> frame [254,0,33,1,32]
    
23. 2023-09-18T09:31:57.339Z zigbee-herdsman:adapter:zStack:znp:SREQ --> SYS - ping - {"capabilities":1}
    
24. 2023-09-18T09:31:57.341Z zigbee-herdsman:adapter:zStack:unpi:writer --> frame [254,0,33,1,32]
    
25. Zigbee2MQTT:error 2023-09-18 17:32:03: Error while starting zigbee-herdsman
    
26. Zigbee2MQTT:error 2023-09-18 17:32:03: Failed to start zigbee
    
27. Zigbee2MQTT:error 2023-09-18 17:32:03: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions
    
28. Zigbee2MQTT:error 2023-09-18 17:32:03: Exiting...
    
29. Zigbee2MQTT:error 2023-09-18 17:32:03: Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
    
30.     at ZStackAdapter.start (/app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:103:27)
    
31.     at Controller.start (/app/node_modules/zigbee-herdsman/src/controller/controller.ts:132:29)
    
32.     at Zigbee.start (/app/lib/zigbee.ts:60:27)
    
33.     at Controller.start (/app/lib/controller.ts:101:27)
    
34.     at start (/app/index.js:107:5)

複製代碼

重新啟動HA、router、z2m網關、重新檢查設定等等都無法解決， 所以上來向各位大神求助

感謝！

charles

把zigbee2mqtt移除重新安裝看看~Z2M斷電重開

barryboy5566

charles 發表於 2023-9-18 19:17
把zigbee2mqtt移除重新安裝看看~Z2M斷電重開

z2m網關重開、移除z2m再安裝有試過也不能
也有回覆到三週前的備份後還是不行

barryboy5566

後來發現應該是復電後網關壞掉了，已暫時在新的網關來之前，用小米多模網關來頂一下

charles

barryboy5566 發表於 2023-9-19 01:42
後來發現應該是復電後網關壞掉了，已暫時在新的網關來之前，用小米多模網關來頂一下 ...

有解決就好～用小米多模網關也是不錯的選擇～！