M5刷機yaml分享 單鍵

Borfang

依照參考的網路分享資料
Led狀態燈不會正常亮
目前為參考Mini大的亂改的版本
已修正


substitutions:
  devicename: m5-1button
  upper_devicename: "M5 1Button"
  friendly_name: M5 1Button

esphome:
  name: $devicename
  on_boot:
    then:
      - light.dim_relative:
          id: backlight
          relative_brightness: 20%
  

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
#  password: "your-ota-password"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "M5-1Button"
    password: "87654321"

web_server:

captive_portal:

# Example configuration entry
text_sensor:
  - platform: wifi_info
    ip_address:
      name: IP Address
    ssid:
      name: Connected SSID
    mac_address:
      name: Mac Address

sensor:
# Uptime
  - platform: uptime
    name: ${friendly_name} Uptime

# WiFi Signal
  - platform: wifi_signal
    name: ${friendly_name} WiFi Signal
    update_interval: 60s

status_led:
  pin:
    number: GPIO5
    inverted: true

switch:
  - platform: gpio
    id: relay_1
    name: "Button"
    pin: 23
    on_turn_on:
      - output.turn_on: buttonlight
    on_turn_off:
      - output.turn_off: buttonlight
   
output:
  - platform: ledc
    pin: 18
    frequency: 1000 Hz
    id: backlight_ledc
  - platform: gpio
    id: buttonlight
    pin: 19

light:
  - platform: monochromatic
    output: backlight_ledc
    name: "Back Light"
    id: backlight

binary_sensor:
  - platform: gpio
    id: button
    pin:
      number: 0
      mode: INPUT_PULLUP
    on_press:
      - switch.toggle: relay_1