8266+ESPHOME+3xPZEM-004T家庭用電監控

diba

先上圖, 這是我家的用電監控:


再來進入主題:
1. 用原廠的上位機軟件設定各個PZEM-004T的address，本例設定為4、5、6


2. 參考原廠圖示接線，其實3.3V就可以了，不一定非要5V，三顆PZEM怎麼並聯就不用細說了吧


3. 重點是YAML，整個COPY回去name跟id改一改就能用了

1. substitutions:
   
2.   device_name: energy-ac46
   
3. 
   
4. esphome:
   
5.   name: ${device_name}
   
6.   platform: ESP8266
   
7.   board: nodemcuv2  
   
8. 
   
9. logger:
   
10.   baud_rate: 0 # (UART logging interferes with pzem)
    
11.   level: DEBUG
    
12.   #hardware_uart: uart1
    
13. 
    
14. api:
    
15. 
    
16. ota:
    
17.   password: !secret wifi_pw
    
18. 
    
19. web_server:
    
20.   port: 80  
    
21. 
    
22. wifi:
    
23.   ssid: !secret wifi_ssid
    
24.   password: !secret wifi_pw
    
25.   ap:
    
26.     ssid: ${device_name}_Fallback
    
27.     password: !secret wifi_pw
    
28.   #manual_ip:
    
29.     #static_ip: 192.168.200.111
    
30.     #gateway: 192.168.200.254
    
31.     #subnet: 255.255.255.0
    
32. 
    
33. captive_portal:
    
34. 
    
35. uart:
    
36.   - tx_pin: D1
    
37.     rx_pin: D2
    
38.     baud_rate: 9600
    
39.     stop_bits: 1
    
40.    
    
41. modbus:
    
42. 
    
43. binary_sensor:
    
44.   - platform: status
    
45.     name: "${device_name} Status"
    
46. 
    
47. sensor:
    
48.   - platform: pzemac
    
49.     id: pzemac4
    
50.     energy:
    
51.       name: "energy_ac4"
    
52.       filters:
    
53.         - multiply: 0.002
    
54.       unit_of_measurement: kWh
    
55.       accuracy_decimals: 1
    
56.     current:
    
57.       name: "current_ac4"
    
58.       id: "current_ac4"
    
59.       accuracy_decimals: 1
    
60.     voltage:
    
61.       name: "voltage_ac4"
    
62.       filters:
    
63.         - multiply: 2   
    
64.       accuracy_decimals: 1
    
65.     frequency:
    
66.       name: "frequency_ac4"
    
67.       accuracy_decimals: 1
    
68.     power_factor:
    
69.       name: "factor_ac4"
    
70.       accuracy_decimals: 1
    
71.     power:
    
72.       name: "power_ac4"
    
73.       id: "power_ac4"
    
74.       filters:
    
75.         - multiply: 2      
    
76.       accuracy_decimals: 0
    
77.     update_interval: never
    
78.     address: 4
    
79.    
    
80.   - platform: pzemac
    
81.     id: pzemac5
    
82.     energy:
    
83.       name: "energy_ac5"
    
84.       filters:
    
85.         - multiply: 0.002
    
86.       unit_of_measurement: kWh
    
87.       accuracy_decimals: 1
    
88.     current:
    
89.       name: "current_ac5"
    
90.       id: "current_ac5"
    
91.       accuracy_decimals: 1
    
92.     voltage:
    
93.       name: "voltage_ac5"
    
94.       filters:
    
95.         - multiply: 2      
    
96.       accuracy_decimals: 1
    
97.     frequency:
    
98.       name: "frequency_ac5"
    
99.       accuracy_decimals: 1
    
100.     power_factor:
     
101.       name: "factor_ac5"
     
102.       accuracy_decimals: 1
     
103.     power:
     
104.       name: "power_ac5"
     
105.       id: "power_ac5"
     
106.       filters:
     
107.         - multiply: 2      
     
108.       accuracy_decimals: 0
     
109.     update_interval: never
     
110.     address: 5
     
111. 
     
112.   - platform: pzemac
     
113.     id: pzemac6
     
114.     energy:
     
115.       name: "energy_ac6"
     
116.       filters:
     
117.         - multiply: 0.002
     
118.       unit_of_measurement: kWh
     
119.       accuracy_decimals: 1
     
120.     current:
     
121.       id: "current_ac6"
     
122.       name: "current_ac6"
     
123.       accuracy_decimals: 1
     
124.     voltage:
     
125.       name: "voltage_ac6"
     
126.       filters:
     
127.         - multiply: 2      
     
128.       accuracy_decimals: 1
     
129.     frequency:
     
130.       name: "frequency_ac6"
     
131.       accuracy_decimals: 1
     
132.     power_factor:
     
133.       name: "factor_ac6"
     
134.       accuracy_decimals: 1
     
135.     power:
     
136.       name: "power_ac6"
     
137.       id: "power_ac6"
     
138.       filters:
     
139.         - multiply: 2      
     
140.       accuracy_decimals: 0
     
141.     update_interval: never
     
142.     address: 6
     
143. 
     
144.   - platform: total_daily_energy
     
145.     name: "energy_ac4_daily"
     
146.     power_id: power_ac4
     
147.     id: energy_ac4_daily
     
148.     unit_of_measurement: kWh
     
149.     accuracy_decimals: 1
     
150.     icon: mdi:counter
     
151.     filters:
     
152.       - multiply: 0.001
     
153. 
     
154.   - platform: total_daily_energy
     
155.     name: "energy_ac5_daily"
     
156.     power_id: power_ac5
     
157.     id: energy_ac5_daily
     
158.     unit_of_measurement: kWh
     
159.     accuracy_decimals: 1
     
160.     icon: mdi:counter
     
161.     filters:
     
162.       - multiply: 0.001
     
163. 
     
164.   - platform: total_daily_energy
     
165.     name: "energy_ac6_daily"
     
166.     power_id: power_ac6
     
167.     id: energy_ac6_daily
     
168.     unit_of_measurement: kWh
     
169.     accuracy_decimals: 1
     
170.     icon: mdi:counter
     
171.     filters:
     
172.       - multiply: 0.001
     
173. 
     
174.   - platform: template
     
175.     name: "today_ac46"
     
176.     id: "today_ac46"
     
177.     icon: mdi:counter
     
178.     device_class: energy
     
179.     state_class: measurement
     
180.     unit_of_measurement: kWh
     
181.     accuracy_decimals: 1
     
182.     lambda: |-
     
183.             return id(energy_ac4_daily).state + id(energy_ac5_daily).state + id(energy_ac6_daily).state ;
     
184. #           return id(energy1_all_daily).raw_state + id(energy2_all_daily).raw_state
     
185. 
     
186. #################################
     
187. #SLOW SENSORS FOR HOME ASSISTANT#
     
188. #################################
     
189.   - platform: template #########################
     
190.     name: "current_ac4_slow"
     
191.     lambda: |-
     
192.       if (id(current_ac4).state) {
     
193.         return (id(current_ac4).state);
     
194.       } else {
     
195.         return 0;
     
196.       }
     
197.     unit_of_measurement: A
     
198.     icon: "mdi:alpha-a-circle"
     
199.     update_interval: 60s
     
200.   - platform: template #########################
     
201.     name: "current_ac5_slow"
     
202.     lambda: |-
     
203.       if (id(current_ac5).state) {
     
204.         return (id(current_ac5).state);
     
205.       } else {
     
206.         return 0;
     
207.       }
     
208.     unit_of_measurement: A
     
209.     icon: "mdi:alpha-a-circle"
     
210.     update_interval: 60s
     
211.   - platform: template #########################
     
212.     name: "current_ac6_slow"
     
213.     lambda: |-
     
214.       if (id(current_ac6).state) {
     
215.         return (id(current_ac6).state);
     
216.       } else {
     
217.         return 0;
     
218.       }
     
219.     unit_of_measurement: A
     
220.     icon: "mdi:alpha-a-circle"
     
221.     update_interval: 60s
     
222. 
     
223. time:
     
224.   - platform: homeassistant
     
225.     id: homeassistant_time
     
226. 
     
227. switch:
     
228.   - platform: restart
     
229.     name: "${device_name}_Restart"
     
230. 
     
231.   - platform: uart
     
232.     name: "${device_name}_Reset"
     
233.     data: [0x01, 0x42, 0x80, 0x11]
     
234.   
     
235. interval:
     
236.   - interval: 5s
     
237.     then:
     
238.        - lambda: 'id(pzemac4).update();'
     
239.        - delay: 150ms
     
240.        - lambda: 'id(pzemac5).update();'
     
241.        - delay: 150ms
     
242.        - lambda: 'id(pzemac6).update();'
     
243.       

複製代碼

charles

Diba真強！！！！讚！！