Caddy2 設定一問

Bally

請問各位前輩 我家中的網路是使用Cable_Modem之後再連接Mesh AP, HA則是用有線網路連接在Mesh上原本SSL都很正常, 但是前幾天更新HA版本後, 在外面就都無法連接了.( 連上家中AP則是正常


想請問 我是哪邊設定錯誤了?

家中HA連結網路分布如下
Cable modem分配IP 192.168.0.xx
Mesh AP分配IP 192.168.100.xx
HA的IP是192.168.100.31


Port 設定如下
Cable Modem


Cable Modem 分配給Mesh AP的IP為192.168.0.10


Mesh APP分配給HA的IP是192.168.100.31
設定如下
80 Port



443 Port


8155 Port轉8123 Port



Caddy2的設定



麻煩請各為前輩 幫我看看 是那邊設定錯誤了?
要怎麼改呢?

charles

全錯了～
外部8155-＞內部8155
Caddyfile要這様才對

1. https://XXXXX.duckdns.org:8155 {
   
2. 
   
3.   reverse_proxy 192.168.100.31:8123
   
4. 
   
5. }   

複製代碼

外部8155到內部8155後 由CADDY2來轉才對 論壇有寫範例～你沒仔細看或沒理解怎麼去寫CADDYFILE

Bally

HI Charles,
感謝回覆, 我按照你的寫法後, 還是出現Unable to connect to Home Assistant(第一篇上面的圖示  




Log 如下
{"level":"info","ts":1633350327.2158864,"msg":"using provided configuration","config_file":"/share/caddy/Caddyfile","config_adapter":""}
{"level":"warn","ts":1633350327.218628,"msg":"input is not formatted with 'caddy fmt'","adapter":"caddyfile","file":"/share/caddy/Caddyfile","line":2}
{"level":"info","ts":1633350327.2279098,"logger":"admin","msg":"admin endpoint started","address":"tcp/localhost:2019","enforce_origin":false,"origins":["localhost:2019","[::1]:2019","127.0.0.1:2019"]}
{"level":"info","ts":1633350327.2295272,"logger":"http","msg":"enabling automatic HTTP->HTTPS redirects","server_name":"srv0"}
{"level":"info","ts":1633350327.2308016,"logger":"tls.cache.maintenance","msg":"started background certificate maintenance","cache":"0x40002a0070"}
{"level":"info","ts":1633350327.2311144,"logger":"http","msg":"enabling automatic TLS certificate management","domains":["xxxxxx.duckdns.org"]}
{"level":"info","ts":1633350327.2312975,"logger":"tls","msg":"cleaning storage unit","description":"FileStorage:/ssl/caddy"}
{"level":"info","ts":1633350327.2337232,"logger":"tls","msg":"finished cleaning storage units"}
{"level":"info","ts":1633350327.2351727,"msg":"autosaved config (load with --resume flag)","file":"/data/caddy/autosave.json"}
{"level":"info","ts":1633350327.2355938,"msg":"serving initial configuration"}

charles

Bally 發表於 2021-10-4 20:27
HI Charles,
感謝回覆, 我按照你的寫法後, 還是出現Unable to connect to Home Assistant(第一篇上面的圖示 ...

你的網址怎麼會是 xxxxxx.duckdns.org 照抄呢？ 你要自已去申請DUCKDNS 不是照抄就能用 你先去看看kris老師的教學吧～
https://www.justplus.com.tw/duckdns.html

https://www.justplus.com.tw/http1.html

https://www.justplus.com.tw/http2.html

https://www.justplus.com.tw/caddy.html <==這篇是CADDY 不是CADDY2 先了解觀念吧

Bally

xxxxxx 那是我改的...Caddy2 裡面的 不是呦
如果不是使用SSL的方式登入, 是可以進去的
Kris老師的我有看, 老師的影片是 無線AP直接轉..
但是不知道是不是因為Cable moden 轉Port后 在轉一次 Mesh AP的關係. 所以在轉Port的時候出問題
.
我在研究看看好了...謝謝 Charles大大

charles

第四台網路要打電話去綁你的WAN PORT MAC才能用

monkchou

會不會跟config裡以下的設定有關?
http:
  use_x_forwarded_for: true
  trusted_proxies:
    - 192.168.1.0/24
  ip_ban_enabled: true
  login_attempts_threshold: 5

Bally

charles 發表於 2021-10-5 16:06
第四台網路要打電話去綁你的WAN PORT MAC才能用

我想應該不是
因為在HA未升級前是正常的
是更新後才出現問題.
我再到國外爬文看看好了...感謝抽空幫忙回答喔

Bally

monkchou 發表於 2021-10-10 10:36
會不會跟config裡以下的設定有關?
http:
  use_x_forwarded_for: true

這個應該是NGINX的設定? (爬國外論壇的XDDD
我等等試試看...謝謝喔

Steven

Bally 發表於 2021-10-26 23:07
這個應該是NGINX的設定? (爬國外論壇的XDDD
我等等試試看...謝謝喔

Hi Bally:

你好我也會有這情況
我是使用軟路由Openwrt~~~
請問你也是嘛